Purchase tips for folding tables - Maintenance and cleaning of folding tables
Purchase tips for folding tables
Since it is a folding table, most of the foldable parts are made of metal. Therefore, you should pay attention to the following points:
1. When purchasing such tables, you should pay attention to whether the welding points are smooth and have no gaps.
2. It depends on whether the bayonet is firm and whether the sliding groove is astringent.
3. Pay attention to whether the coating is uniform and soft and whether the spring performance is good.
4. It depends on the overall quality of the frame. Use both hands to shake the entire folding table front, back, left and right, and firmly indicate that the frame is good.
5. Finally, open and close the table once, change each angle, and experience whether the comfort is good.
6. In addition, the folded part should be opened and closed easily, but not tight or loose, just right.
Cleaning of folding table
1. When washing, rinse the surface with clean water to prevent residual washing liquid from corroding the surface of the steel pipe.
2. The folding table table should not be poured directly on the tabletop with clean water or wiped directly with a rag with water. This can easily cause water inlet in the edge of the tabletop and damage it. First, use a semi-dry rag with detergent to clean the tabletop, and then wipe it clean with a dry rag.
3. Avoid using disinfectant, gasoline, Mr. Vimeng and other detergents, as well as washing liquid, steel wool balls, grinding tools, etc. of grinders.
4. You can use soap and weak washing to wash the surface of the steel pipe and easily removed dirt.
5. If the steel pipe has bleach and various acids attached to the surface, rinse it immediately with water, then soak it with ammonia solution or neutral soda carbonate water solvent, wash it with neutral detergent or warm water, wipe it dry and spray wax for maintenance.
6. The binder component is scrubbed with alcohol or organic solvent (diethyl ether, benzene).
Maintenance of folding table
1. After mopping the floor, be sure to dry the water marks on the surface of the steel pipe with a dry cloth, then spray with car wax or wipe sewing machine oil for maintenance.
2. After the legs of various steel pipes are stained with oil, wipe them clean with dry rags. Do not use rough and sharp materials to scrub the surface of the steel pipe. Especially for mirror-optimized ones, they should be scrubbed with softer fabrics that are not easy to fall off.
3. The surface of the folding table is a fireproof board layer or molded board, and the periphery is made of plastic strips or aluminum alloy strips. During maintenance, you must first use a semi-dry rag with detergent to clean the oil on the table, and then wipe it clean with a dry rag. In order to extend the service life, apply car wax on the table every January to March (available in the car decoration store) to make it beautiful, avoid water, and extend the life of the table.
4. When washing, rinse the surface with clean water, then spray car wax or wipe sewing machine oil for maintenance.