How to cleverly clear the blockage of kitchen pipes

 12:51pm, 20 May 2025

How to cleverly unblock the kitchen pipes? The dishwasher is one of the most important facilities in a home kitchen. When boiling water and cooking, people can’t live without the dishwashing tank almost a day. However, due to the lack of pipeline care, many families habitually pour leftover residues, frying waste oil, etc. into the bowl and trough pipes when cleaning dishes. Before we knew it, the inner walls of the kitchen drain pipes were filled with oil and waste. Clogged kitchen pipes is a very headache for housewives. When the blocked area is relatively shallow, try the tips shared by the editor below.

Tips 1. Mechanical cleaning method

If the hot water method does not work, finding a hard iron wire and making a hooking tool can also solve the problem of shallow blockage. Sometimes, using a drain pipe dredger to pull back and forth the bowl trough drain can also solve some problems.

Tips 2. Hot water flushing method

Using a large amount of hot water to flush the pipe is the most commonly used method when unblocking the pipe, which is both economical and convenient. Specific method: Plug the drain hole in the rag, turn on the hot water faucet, and quickly pull out the rag after half of the tank of water. Under the action of the air pressure principle, it is quickly poured into the pipeline.

Tips 3. Chemical cleaning agent method

If none of the above methods are effective, you can consider using a special pipeline cleaner for decontamination. At present, there are many cleaning products used for kitchen pipes on the market, including liquid and powder. However, since the cleaning agent has a corrosive effect, the product instructions must be strictly followed during use. Therefore, when choosing chemical cleaning agents, you need to carefully read whether the stain removal product is suitable for home equipment. To protect the environment, you can also make some environmentally friendly cleaning agents to clean the pipes. For example, after neutralizing and stirring the same amount of baking soda and acetic acid, pouring them into the pipes can also remove a lot of dirt.